950650 - SICvantage Standard Abutment red, anterior, 15° angle, GH 5.0 mm (incl. SIC Standard Fixation Screw and Impression Cap)
SICvantage Standard Abutments are available in various designs for fabricating cemented or screw-retained single crowns and bridges. The abutment design is shaped like a prepared tooth and ensures easy, cost-effective fabrication of superstructures with minimal material reduction - in the same way as prosthetic treatment of a natural tooth - regardless of whether the restoration is a single crown or a long-span bridge.
The section of the standard abutment interfacing the implant has a conical connecting geometry and a 4 groove index - the SICvantage® Swiss Cross. The abutment has a convex / concave gingival emergence from the implant level to the gingival height (GH) in an anterior (slim) respectively posterior (wide) design. The following functional section for fitting the crown has a flat surface, which acts as anti-rotation. An integrated transversal thread allows prefabrication of horizontal screw retention of the crown with the abutment.
The Morse taper, with a total cone angle of 2.8°, leads to outstanding self-locking between implant and abutment, which is indissoluble or „cold-welded“. The large cone length of 3 mm distributes the pressure and bending forces uniformly and deeply in the implant and surrounding bone. The welding process produces a virtually one-piece implant, with maximum rigidity and practically no micromovement. Easy removal of the abutment is ensured by a special instrument – the extractor.
For direct impression taking each abutment will be delivered with the corresponding transfer cap.
The abutments can be customized by trimming and polishing. The standard abutment is fixed in position on the implant either without retention screw (by biting onto or tapping lightly) or by using the SICvantage fixation screw. The screw is tightened with the SIC Screwdriver and the Torque Ratchet using a torque of 20 Ncm.
|Name||SICvantage Standard Abutment red, anterior, 15° angle, GH 5.0 mm (incl. SIC Standard Fixation Screw and Impression Cap)|
|Ø Implant Connector (mm)||2.9|
|Ø Prosthetic (mm)||5.4|
|Height Gingiva (mm)||5.0|
|Height Specific (mm)||12.0|
|Height Mod (mm)||7.0|
|Material||Titanium Grade 5|
|Connector Geometry||Morse Taper and Swiss Cross|