950623 - SICvantage Standard Abutment blue, anterior, straight, GH 3.0 mm (incl. SIC Standard Fixation Screw and Impression Cap)

SICvantage Standard Abutments are available in various designs for fabricating cemented or screw-retained single crowns and bridges. The abutment design is shaped like a prepared tooth and ensures easy, cost-effective fabrication of superstructures with minimal material reduction - in the same way as prosthetic treatment of a natural tooth - regardless of whether the restoration is a single crown or a long-span bridge.

The section of the standard abutment interfacing the implant has a conical connecting geometry and a 4 groove index - the SICvantage® Swiss Cross. The abutment has a convex / concave gingival emergence from the implant level to the gingival height (GH) in an anterior (slim) respectively posterior (wide) design.  The following functional section for fitting the crown has a flat surface, which acts as anti-rotation. An integrated transversal thread allows prefabrication of horizontal screw retention of the crown with the abutment.

The Morse taper, with a total cone angle of 2.8°, leads to outstanding self-locking between implant and abutment, which is indissoluble or „cold-welded“. The large cone length of 3 mm distributes the pressure and bending forces uniformly and deeply in the implant and surrounding bone. The welding process produces a virtually one-piece implant, with maximum rigidity and practically no micromovement. Easy removal of the abutment is ensured by a special instrument – the extractor.

For direct impression taking each abutment will be delivered with the corresponding transfer cap.

The abutments can be customized by trimming and polishing. The standard abutment is fixed in position on the implant either without retention screw (by biting onto or tapping lightly) or by using the SICvantage fixation screw. The screw is tightened with the SIC Screwdriver and the Torque Ratchet using a torque of 20 Ncm.

No. 950623
Name SICvantage Standard Abutment blue, anterior, straight, GH 3.0 mm (incl. SIC Standard Fixation Screw and Impression Cap)
Ø Implant Connector (mm) 2.5
Ø Prosthetic (mm) 4.4
Height Gingiva (mm) 3.0
Height Specific (mm) 10.0
Height Mod (mm) 7.0
Material Titanium Grade 5
Connector Geometry Morse Taper and Swiss Cross
Torque (Ncm) 20
SICvantage Lab Implant blue

950505 - SICvantage Lab Implant blue

SIC Standard Fixation Screw

936658 - SIC Standard Fixation Screw

SICvantage Impression Cap for Standard Abutments, blue

950696 - SICvantage Impression Cap for Standard Abutments, blue

SIC Horizontal Screw, length-adjustable (for transversal screw connection)

936659 - SIC Horizontal Screw, length-adjustable (for transversal screw connection)

SIC Sleeve for Horizontal Screw (high-fusing alloy)

936664 - SIC Sleeve for Horizontal Screw (high-fusing alloy)

SICvantage Extractor, short for prosthetics in blue or red

951618 - SICvantage Extractor, short for prosthetics in blue or red

SICvantage Extractor, long for prosthetics in blue or red

951619 - SICvantage Extractor, long for prosthetics in blue or red

SICvantage max Product Overview

SICvantage max Product Overview

SICvantage max Brochure

SICvantage max Brochure

Prosthetic Overview Conical

Prosthetic Overview Conical