935168 - SIC Bone Tap Ø 4.5 mm
An initial thread should be cut in cases with highly cortical bone structures (D1/D2). The depth of
the thread cut is normally half the length of the implant. The thread can be tapped manually or using a handpiece. Speed max. 35 rpm.
The bone tap has laser markings that correspond to the implant length.
|Name||SIC Bone Tap Ø 4.5 mm|
|Height Specific (mm)||14.5|
|Material||Stainless steel for surgical devices|
|Connector Geometry||ISO Adapter Angle Piece|